亚洲中文字幕精品一区二区三区,中文字幕人妻在线中字

HOME
PRODUCTS
SUPPORT
NEWS
ABOUT US
Language/語言
Login
Register

Tips to Replace Developers on Sharp Printers

19 Oct,2022

Hi, everyone!

Nice to see you again. Let's look at how to replace developers on Sharp printers today.

When the following error appears, it means the indicated developer in the developer unit is used up and needs to be replaced.

I: Developer Replacement

1. Turn off the machine power and open the front cover. Remove the toner collection container.

2. Remove the 2 fixing screws. Open the toner collection container. Remove the developer unit cable.

3. Take out the developer unit that needs to be replaced (Note: When replacing the color developer, replace the Yellow, Magenta,

and Cyan developers at the same time. If only one developer is replaced, the color balance may be abnormal. The black developer can be replaced alone.)

4. Open the main charger cover. Add the appropriate amount of developer.

5. Turn the white gear in a forward direction several times.

6. Install the developer unit and other parts back into the machine. Close the front cover.

II: Color Balance Adjustment

1. Take out all the toner cartridges. Close the front cover.

2. Turn on the power. Double click the "Home" button.

3. Click the version number in the lower right corner. Enter "#*c*" to enter the maintenance mode.

4. Select NO.25. Select NO.02.

5. Select the developing unit to be adjusted → When the EXECUTE key is pressed, it is highlighted.

(After stirring for 1 min, the average value of toner concentration sensor detection level is stored as the reference toner concentration control value.)